12210KM

The 12201KM bearing belongs to Type Ⅱ cylindrical roller bearings, featuring an iron cage as its core characteristic. It has a compact overall structure, excellent rigidity, strong radial load-bearing capacity, low friction coefficient, stable operation with low noise, outstanding wear resistance and fatigue resistance. It can effectively reduce equipment operation energy consumption, suitable for medium-low speed, medium-heavy load general industrial working conditions, and is a common basic bearing model in industrial transmission equipment.

In terms of application scenarios, the 12201KM Type Ⅱ cylindrical roller bearing has a wide range of uses, mainly applicable to motors, reducers, machine tools, conveyors, fans, water pumps, textile machinery and various general industrial transmission equipment. It is especially suitable for occasions with high requirements for radial load and cost control, and can provide stable and reliable support for the transmission parts of equipment, ensuring efficient operation of equipment.

The installation method is the key to ensuring the service life of the bearing. The specific steps are as follows: before installation, thoroughly clean the bearing, journal and bearing housing bore to remove surface oil stains, impurities and burrs, carefully check the dimensional accuracy of each component to ensure a proper fit, and avoid affecting the installation quality due to impurities or dimensional deviations; during installation, strictly ensure the coaxiality of the shaft and the housing bore to eliminate eccentric load and inclination. Press-fitting method can be adopted, and violent knocking is prohibited to prevent damage to the internal structure of the bearing and the iron cage; after installation, timely fill with suitable grease (or lubricating oil) to ensure sufficient lubrication, and take good sealing protection measures to prevent dust, moisture and impurities from entering the bearing, avoiding increased component wear.

Usage specifications and precautions: during use, regularly check the bearing temperature, lubrication status and operation sound, pay close attention to the equipment operation, prohibit overloading and high-speed impact operation, and avoid deformation of the iron cage or damage to the rollers due to excessive pressure on the bearing; supplement or replace aged grease on time to ensure good lubrication effect at all times; if the bearing has abnormal noise, overheating, abnormal vibration and other conditions, stop the machine immediately for inspection, troubleshoot (such as insufficient lubrication, impurity entry, installation deviation, etc.), and put it into use again only after the fault is completely eliminated.

In terms of service life, under the premise of normal working conditions, correct installation, standardized lubrication and regular maintenance, the service life of the 12201KM Type Ⅱ cylindrical roller bearing (with iron cage) can reach tens of thousands of hours; if the working conditions are harsh (such as long-term heavy load, high dust, high temperature, insufficient lubrication), or improper installation and untimely maintenance, the service life will be shortened accordingly. Doing a good job in daily maintenance and standardized operation can effectively extend the service life of the bearing and reduce equipment maintenance costs and failure rates.

Hot Tags: 12210km, China 12210km manufacturers, suppliers, factory