23968

The core function of the 23968 bearing is to withstand heavy loads and to meet the requirements for self-aligning performance in mechanical transmission scenarios. The 23968 bearing is a self-aligning roller bearing with an inner diameter of 340mm, an outer diameter of 460mm, and a thickness of 90mm. The outer ring of this bearing has one common spherical raceway, and the inner ring has two raceways that are inclined at an angle relative to the bearing axis. This structure enables it to have an automatic self-aligning performance, being less affected by the angle error between the shaft and the bearing housing seat or the bending of the shaft, and is suitable for applications where installation errors or shaft deflection cause angle errors. It can not only withstand large radial loads but also withstand bidirectional axial loads. Additionally, some 23968 bearings have conical holes (such as 23968K), which can be installed with locking rings or removal rings, facilitating axial positioning and pre-tightening on the shaft, and making installation and disassembly convenient. Based on these characteristics, the 23968 bearing is mainly used in large-scale mechanical equipment in industries such as mining, metallurgy, cement, and power, such as mining crushers, large rolling mills, cement rotary kilns, wind power equipment, etc. These equipment usually need to withstand large loads and operate in harsh environments. The 23968 bearing can ensure the stable operation of the equipment.